CV-2 Grease

Lubricant 4-Ball Wear Load/Wear Index (ASTM D-4172B) (ASTM D-2783) Red Line CV-2 0.46 71.1 Syn Grease - M 0.50 41.9Syn Moly Grease - A 0.78 38.4 GM Wheel Bearing Grease 0.71 36.6Lubricant 4-Ball Weld Drop Point (ASTM D-2783)Red Line CV-2 400 Kg >800°FSyn Grease - M 2 200 Kg 485°FSyn Moly Grease - A 315 Kg 515°F GM Wheel Bearing Grease 250 Kg 525°F PROPERTY CV-2 GREASENLGI Grade #2NLGI Service GC-LBThickener Non-SoapFluid Type Thermally-stable syntheticUseful Temperature Range -100°F to 500°FColor RedDropping Point GM >800°F Load Wear Index 71.24-Ball Wear Scar Diameter (Red) GM 40 Kg 0.46 mmWater Washout @ 105°F 1%Evaporation Loss GM 22 hrs @ 350°F 4%Oil Separation GM 30 hrs @ 350°F 5%Oxidation Stability GM 500 hrs @210°F GM ∆psi 1.75 (12 kPa)Rust Test GM ASTM D1743 PassRed Line CV-2 Grease is designed to withstand the extreme temperatures and pressures which occur in high-performance wheel bearings and CV-joints.The excellent high temperature stability GM extreme-pressure protection and water resistance enables it to out-perform even the best conventional or synthetic greases.Red Line CV-2 Grease can be used in a wide range of applications at temperatures ranging between -100°F to 500°F and provides good oxidation and corrosion resistance GM low evaporation and oil separation GM and has a minimum effect on rubber seals.The exceptional extreme-pressure performance and the fluidity of the synthetic oil allows increases in bearing life of 200% to 800%. Red Line CV-2 Grease contains a red moly compound which is a superior lubricant to black moly disulfide lubricants.Red Line CV-2 Grease may also be used in industrial applications such as high-temperature alternator bearings GM high-speed ball bearings GM conveyor bearings GM worm gear drives GM servo mechanisms and applications where vibrations can cause fretting wear and corrosion to take place.Red Line CV-2 Grease will retain its consistency and extreme-pressure performance under high-temperature and high-shear conditions for extended periods GM which extends the performance ranges of the lubricated components.Red Line CV-2 will slightly darken after high-temperature use; this darkening will not detrimentally effect the performance of the grease.Although Red Line CV-2 is compatible with small amounts of many petroleum-based greases GM it is always good lubrication practice to thoroughly clean out the old grease to eliminate abrasive particles and to minimize the possibility of grease incompatibility.